| Booth No. |
Exhibitor Name |
WP / JP |
Exhibit Name |
New Function / Feature |
| N001 |
Arai Helmet Ltd. |
|
|
|
| N002 |
Yamada Mfg. Co., Ltd. |
 |
3RING(TM)ROTOR VARIABLE FLOW RATE OIL PUMP |
This product is an item for reducing the consumption power of the engine.
This pump has two discharge sources in one rotor set by using 3RING(TM)ROTER.
Furthermore, this pump stops one discharge sourcewith a flow rate this pump stops one discharge source with a flow rate control valve and largely reduces the power of the oil pump. |
| |
ELECTRIC WATER PUMP FOR ENGINE COOLING |
This pump controls the circulation flow rate of the engine cooling water.
Due to motor drive, this pump can control a high-precision flow rate in a wide range of engine speed than the conventional belt drive water pump.
Moreover, because the control motor is brushless and sensorless-controlled. |
| |
BRUSHLESS MOTOR TYPE ELECTRIC WATER PUMP |
This pump circulates cooling water to the inverter circuit of hybrid car.
Because the pump and the motor combine into one unit, it is compact and light-weight.
Moreover, the motor reduces electric power consumption with the high efficiency magnetic circuit. |
| |
MAGNETIC COUPLING TYPE ELECTRIC WATER PUMP |
This pump supplies hot water to the heater core at the time of engine idling stop.
By the adoption of a magnet coupling, it decreases electric power consumption because there is no power loss in the seal part.
Moreover, due to the optimized design of the motor part, it reduces noise and the vibration substantially. |
| N003 |
Fujikiko Co., Ltd. |
|
New Manual Slide |
|
| |
New Powered Slide |
|
| |
Series of round type recliners |
|
| |
New rake tilt & telescopic steering column |
|
| |
New E power rake tilt&telescopic steering column |
|
| |
Rake tilt & telescopic steering column with EPS |
|
| |
Tilt & telescopic steering column for track |
|
| |
Low cost type steering column for passenger car |
|
| |
Cable Column with Mechanical Clutch System for SBW |
|
| |
Standard type Manual Mode A/T Shifter |
|
| |
IP(Instrumental Panel) mounted A/T Shifter |
|
| |
Standard type straight A/T shifter |
|
| |
Straight A/T Shifter with Sport Mode for Mechanical Shift Lock |
|
| |
Fineblanking forming processing technology |
|
| |
Broaching processing technique of nylon coating shaft |
|
| N004 |
Kyowa Kogyo Co., Ltd. |
|
STEERING JOINT/UNIVERSAL JOINT |
The First cold forged steering joint in Japan was applied to automobiles twenty-five years ago and as been studied and developed. High rigidity and good touch produced by our manufacturing method is focused worldwidely. |
| N101 |
Jatco Ltd. |
|
New Automatic Transmission for medium and large RWD vehicles |
New Automatic Transmissions for medium and large FWD vehicles. |
| |
Belt CVT for mini vehicles |
* Light-weight compact design
* Wider gear ratio range for both acceleration performance and fuel consumption
* High efficiency and fuel economy at the top of its class |
| |
Belt CVT for small vehicles |
* Light-weight compact design
* Wider gear ratio range for both acceleration performance and fuel consumption
* Applicable up to 1.8-liter class |
| |
Belt CVT for medium vehicles |
* Light and compact design
* Wider gear ratio range for both acceleration performance and fuel consumption
* High efficiency and fuel economy at the top of its class
* Applicable up to 2.5-liter class |
| |
Belt CVT for large vehicles |
* Applicable up to 3.5L class vehicles. First in this class around the world.
* Wider gear ratio range for both acceleration performance and fuel consumption
* High torque capacity |
| |
Toroidal CVT for medium and large vehicles |
* World's first
* High torque capacity
* Provides smooth driving and uncompromising response to acceleration and deceleration
* Improved fuel economy |
| |
6-speed AT for medium and large vehicles |
* Wider gear ratio range for both acceleration performance and fuel consumption
* Light-weight compact design
* High efficiency and fuel economy at the top of its class |
| N102 |
Yanagawa Seiki Co., Ltd. |
|
4-PINION DIFFERENTIAL |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| N103 |
F.C.C. Co., Ltd. |
|
CLUTCH FOR MOTORCYCLE |
Displaying clutches accommodating newest technologies to enhance customers' operability such as Assist & Slipper clutch and clutch with back torque limiter function, etc.
|
| |
CLUTCH FOR AUTOMOBILE |
Displaying AT Clutches adopting new press and rolling technology and achieved less machining process and LOW-HOLD clutches to attain small size, light weight and decreasing number of parts, etc. |
| N104 |
Univance Corp. |
|
Gear Box for HEV / EV / FCV |
This is an environment-friendly,Gear Box for HEV and EV,FCV, fuel consumption is reduced by friction, and durability is also increased.
(1)Improvement of Mileage
(2)Light Weight
(3)Increase of Durability |
| |
Motor / Generator Gear Box for Hybrid Truck |
This is an environment-friendly,Gear Box for Hybrid Truck, fuel consumption is reduced by friction, and durability is also increased.
(1)Improvement of Mileage
Open-type bearing is used for the motor shaft(optimization of lubrication system). Fuel consumption at the bearing area.
(2)Increase of Durability
Life of the gear and the motor shaft bearing is extended.
(3)Light Weight
By combining the gearbox with the motor, the unit weight and quantity of parts are reduced. |
| |
UNIVANCE Cornering System |
This is a New UNIVANCE Cornering system,more smooth performance and operation. This new system have three mechanisms as below.
(1)Full time 4WD mechanism
(2)LSD mechanism
(3)High performance cornering |
| N105 |
HI-LEX Corp. |
|
Control Cable ,Window Regulator & Applications |
|
