| Booth No. |
Exhibitor Name |
WP / JP |
Exhibit Name |
New Function / Feature |
| W010 |
Nippon Piston Ring Co., Ltd. |
|
Piston Rings |
These piston rings were developed as eco-friendly products to meet the operation conditions by specifying material selection, surface modification, and optimum design, etc. |
| |
Cylinder Liners |
Wall-thinning design is applied to the dry liner for diesel engines, and special processing which strengthen the bonding with aluminum is applied to the outer surface of the aluminum casting-in liner, and both of them contribute to the weight reduction of engines. |
| |
Composite Camshafts |
Composite camshafts are camshafts which are produced by bonding the sintered cam lobes and journals, which meet the operation conditions, to steel pipe. The pipes are lightweight because of hollow structure, and the cam lobes are high performance because of sintered alloy. |
| |
Valve Seat Inserts |
By selecting the optimum material, we offer the valve seat inserts which show superior performance even for various engine fuels which meet the environment issues. Our wide lineup is at the top-level of this industry. |
| |
Valve Rocker Arm |
Because of the superior wear-resistance, the tip with sintered alloy is composed to the aluminum body at the contact part with the cam lobe. For further reduction of friction loss, the roller rocker arm with built-in roller at the contact part with cam lobe is widely used in addition. |
| |
Synchronizer Rings |
With warm/multi-stage compacting process, densification/optimum density balance have been realized. Aiming at the improvement in kineticμand the reduction in staticμ by specifying the optimum material selection and the optimum design to meet the operation conditions, the products of higher performance have been realized. |
| |
Metal Injection Molding Parts |
MIM process of 3-D compacting enabled the weight-saving design and the process- saving for automobile engine parts (such function parts as the rocker arms and the fuel injection parts). MIM process is a technology widely used for ornamental and small parts such as the watch parts. On the other hand, we mass-produced the engine function parts by using MIM process for the first time in the industry through the combination with MIM process and Material development power. |
| W011 |
NOK Corp. |
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| W012 |
Keihin Corp. |
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| W013 |
Schaeffler KG |
|
Cut away Engine Model |
Cut away engine models with many parts supplied by Schaeffler Group Automotive. |
| |
Transmission cut away model |
Cut away models of various transmissions. |
| W014 |
Aisan Industry Co., Ltd. |
|
Electronic Control Throttle Body |
|
| |
Variable Induction Valve |
|
| |
Fuel Injector |
|
| |
Fuel Pump |
|
| |
Charcoal Canister Integrated Fuel Pump Module |
|
| |
Relief Valve |
|
| |
Charcoal Canister |
|
| |
Positive Crankcase Ventilation Valve |
|
| |
Electric Water Pump |
|
| |
Water Jacket Spacer |
|
| |
EGR Cooler Bypass Valve |
|
| |
LPG Fuel Supply System |
|
| |
Engine Valve |
|
| |
Throttle Body for Motorcycle |
|
| |
Fuel Pump Module for Motorcycle |
|
| |
Fuel Injector for Motorcycle |
|
| W015 |
Continental Automotive Systems |
|
ContiGuard® |
ContiGuard is our solution to more intelligent vehicle that helps to prevent accidents and reduce the risk of injury for vehicle occupants and pedestrians to minimum. With ContiGuard, we are a big step close to our ambitious goal; Vision-Zero a traffic situation in which people are so well protected that road deaths and serious injuries no longer occur.
ContiGuard embraces the networking of active and passive safety systems and the integration of environmental sensors and telematics. ContiGuard therefore stands for automobiles that can communicate with each other and with the infrastructure to exchange safety information. |
| |
electronic Stability Control |
ESC(Electronic Stability Control) which is currently the most advanced active driving dynamics system available, prevents critical driving conditions before they arise. This decisive contribution to greater levels of driving safety is also, inthe meantime, being installed in compact vehicles. |
| W101 |
MAHLE GmbH |
|
Advanced Technology Demonstrator - downsize engine |
Carbon dioxide reduction of 25%. Power output of 120kW/l. This engine can displace the the ones in the 1.6 ton class passenger cards. |
 |
EVOTEC: lightweight piston for gasoline passenger cars |
This new MAHLE piston has an optimized design with reduced wall thickness. |
| |
Passenger car diesel pistons |
Fibre-reinforced pistons for diesel passenger cars.
Also, produced with Advanced Diesel Casting (ADC), these pistons have much finer microstructure. |
| |
Lead-free bearing and bushes |
Lead-free bushings, bimetallic and Trimetallic bearings.
Excellent wear and seizure performance and excellent fatigue strength. |
| |
Piston ring |
High quality PVD piston ring, with extremely low friction, for high-speed gasoline and diesel engines. |
| |
Cylinder liners |
Rough cast and gray cast iron and aluminum cylinder liners.
These liners are lightweight. Also, the gaps between the cylinders can be reduced and thus, lesser space. Further benefits are optimized cooling, less oil consumption and low friction. |
| |
Lightweight conrods |
Lightweight conrods for high loads |
|
New lightweight valves |
Lightwegith valves for high-speed engines, up to 55% lighter. Thermal resistance is more than 1000 degrees Celsius. MAHLE valves allow higher specific power output and reduces friction. |
| |
Camshafts |
New technologies for assembled camshaft made of steel. |
| |
CamInCam |
The MAHLE CamInCam camshaft allows completely variable management for OHV and SOHC valve trains. This product reduces emissions and consumptions. It also improves the response of turbocharged DOHC downsizing engines. |
| |
Air intake systems |
Resonance induction, variable length, tumble and swirl flaps |
| |
Actuators |
Innovative and integrated solution with compact design |
| |
Oil mist separators |
This oil mist separator, with a switched impactor, efficiently removes even the finest oil droplets over a wide range of blowby flow rates. |
| |
Plastic head cover |
Integrated function - oil mist separation, blow-by return, pressure control |
| |
Diesel filters |
Diesel filters with automatic water discharge |
| |
EGR systems |
Different innovative EGR systems, such as poppet valves for conventional applications, fast switching valves which increase the EGR rate significantly, which increases fuel efficiency by 15% in highload gasoline applications |
| |
Turbochargers |
MAHLE turbochargers with innovative high-temperature concepts. Also, systematic combination with other products such as actuators, EGR systems or liquid cooled manifold modules is also possible.
The diesel turbocharger, with Variable Flow Turbine (VFT) , allows engine outputs up to 150kW. |
| |
|
|
| |
|
|
| W102 |
Robert Bosch GmbH |
|
|
|
| |
Diesel Systems |
Bosch submits three management systems to control diesel engine for better performance. Those three management systems are, "Intake management", "Optimal combustion management", and "Exhaust management". These management systems are controlled electronically and results in cleaner exhaust, higher power output, and lower fuel consumption. |
| |
Gasoline Systems |
Direct gasoline injection for turbo charged engine enables you to enjoy sporty torque characteristic, also low fuel consumption and allows to meet the stringent exhaust emission regulations.
Bosch develops and manufactures the main elements of the steel belt type CVT - Push belt. The feature of steel belt type CVT is able to increase fuel efficiency by optimizing the utilization of engine power because CVT selects transmission ratio and change gears continuously. Steel belt type CVT is able to improve 10% fuel efficiency compared to conventional automatic transmission (In case of Japanese 10･15 mode) and play a role in reduction of CO2. |
| |
Hybrid Systems |
Bosch/Getrag eAD*
The cooperation between the companies Bosch and GETRAG offers compact eAD consisting of integrated high-efficiency electrical machine and sophisticated axle drive.
eAD is suitable for electric vehicle drive unit or electric 4 wheel drive unit.
eAD improves fuel consumption and reduces CO2 emission due to the high-efficiency of electrical machine and axle.
eAD*= electric Axle Drive |
| |
Start/Stop Starter Motor |
Bosch Start-Stop starter enable to auto engine turned off by system and re-start within 0.3 sec* which contributes to reduction of fuel consumption by about 8% and reduction of CO2. (* Bosch data) |
| |
CO2 Sensor |
With Climate Control Sensors of Bosch, CO2 gas leackage detect function for R744 A/C systems and comfort, energy-saving air conditioners can be realized. |
| |
Battery Sensor |
EBS(Electronic Battery Sensor) is estimating battery condition and behavior through the battery current, voltage and temp. and able to realize reliable energy management, stable electronic control and improved emission control. |
| |
CAPS(Combined Active & Passive Safety) |
Via system networking to maximum safety Networking is the key to the intelligent utilization of components and systems for active and passive safety. Driver assistance and vehicle communication which previously operated independently of each other. We are thus helping to avoid accidents or to reduce their severity and thus the risk of injury. |
| |
Driver Assistance Systems |
Driver assistance systems will become increasingly important in the future. That is why we muster our competences in the Driver Assistance Systems division. Together with the automotive industry, we want to develop solutions to enhance the driver's comfort and safety. Our vision is accident-free traffic. |
| |
ESC(Electronic Stability Control) |
Electronic Stability Control (ESC), containing functions of Antilock Braking System (ABS) and Traction Control System (TCS), stabilizes the vehicle with controlling the brake pressure of each appropriate wheel immediately and automatically and furthermore the engine power if necessary, when sensors of ESC identify the risk of skidding. |
| |
VDM(Vehicle Dynamics Management) |
Vehicle Dynamics Management (VDM), the network combining Active Brake Control, Active Steering, Active Suspension system and Drive Train Management brings the possibility of individually setting up vehicle characteristics and behavior focusing at will on safety, dynamics, traction, comfort and convenience.
For example, by coordinating Active Brake Control with the Active Steering the vehicle reacts more precisely in critical situations, and thus increases the safety margin.
The progress of VDM will dramatically improve safety and driving performance |
| |
|
Introducing very reliable aftermarket products by Bosch, which is leading as the No.1 OE supplier in the world with it's years of know-how |
| |
Full Brake Systems |
Full Brake System means the technology to realize optimum brake performance with a combination of each brake components.
Bosch in Japan has Full Brake System R&D capability, and supplies the optimum products to Japanese vehicle manufacturers jointly with global Bosch group. |
| W103 |
Nippon Thermostat Co., Ltd. |
|
THERMOSTAT､THERMOVALVE､THERMOELEMENNTO |
|
| W104 |
Fuji Bellows Co., Ltd. |
|
Thermostat |
Temperature control valve for engine cooling water. |
