| Booth No. |
Exhibitor Name |
WP / JP |
Exhibit Name |
New Function / Feature |
| W001 |
Yamashita Rubber Co., Ltd. |
|
|
|
| |
|
|
| W002 |
Yuasa Co., Ltd. |
|
CRANKSHAFT |
Our crankshafts are used for various kinds of engines, because there are manufactured by plenty of latest processing equipments and technically experienced operating staffs. Materials for the crankshafts such as carbon steel and chrome steel develop into a finished crankshaft through twenty-plus processes.
I exhibit the crankshaft of six processing processes this time, and the real PR DVD processing has you look. |
| W003 |
Nikki Co., Ltd. |
|
|
|
| |
|
|
| W004 |
Iwata Bolt Co., Ltd. |
|
BOLT·NUT |
IHT
HIGH STRENGTH TAPPING SCREW SUPERIOR LAG-DESTRUCTION
IB LOCK SCREW
REASONABLE LOOSENESS-STOP SCREW
SL BOLT
REASONABLE ANTI-LOOSENESS&ANTI-FALLING OFF BOLT
UPS NUT
REASONABLE ANTI-LOOSENESS&ANTI-FALLING OFF NUT |
| W005 |
Mikuni Corp. |
|
Next generation DCP (Dischrage Pump type fuel injection ) |
|
| |
Electronic Throttle body |
|
| |
Small size Throttle body |
|
| |
Resin intake manifold |
|
| |
Accelerator Pedal Module |
|
| |
Air Purge oil Pump |
|
| |
|
|
| |
Continuously Variable Valve Lift |
|
| |
|
|
| |
Exhaust control valve |
|
| |
Hydrogen Sensor |
|
| |
Engine Control Unit |
|
| |
Oil Control Valve |
|
| |
IVT(Infinity Variable Transmission) |
|
| |
Variable Valve Timing |
|
| |
|
|
| |
|
|
| W006 |
Ahresty Corp. |
|
Die cast power train and chassis parts for passenger car |
|
| W007 |
T.RAD Co., Ltd. |
|
Radiator |
Trapezoid Shape Curving Radiator
The first mass produced trapezoid shape curving radiator in the world.
We realized mass production of this shape which there were in the only grand prix world.
The maximum heat radiation area is secured according to cowl shape of car body.
By using curving core, the wind after passing radiator is lead to side face of carbody and we realized high-performance.
Use the thinnest and lightest fan and motor in two-wheeled vehicle industry.
Motorcycle FRAD(Flexible All Aluminum Radiator)
TRAD offer new type radiator that "minimize making die"
Construction Machinery Large size Radiator
World's largest-size all aluminum radiator by once brazing.
Easy to recycle since they are made of all aluminum.
Use rectangle fin, taking blinding into consideration.
In others, we have wide fin variation as to uses.
The variation of size from small to large is abundant. |
| |
Oil cooler |
Stacked Plate Oil Cooler
Three standard rectanglar plates are available.
Possible for : Engine oil / ATF / Coolant combined cooler.
High ratio of performance to volume and easy adaption to different performance requirements by changing number of
plates.
Direct mounting leads to cost advantage.
Clean inside by producing Vacuum brazing process.
Complete heat exchanger is 100 % recyclable.
Production volume : more than 10,000 pcs./day.
Round type ATF Warmer & Cooler
Complete heat exchanger is 100% recyclable.
Vehicle parts contributing to fuel consumption.
We can set the number of plates as to specification. |
| |
EGR cooler |
EGR cooler with winglet tubes
BEHR winglet tube is able to achieve high cooling requirements.
Special winglet array to reduce fouling and reduce required cooler size.
By-pass valve and circuit are integrated.
Reliable laser welding process.
Integrated by-pass and EGR valve will be available.
Wide variation from compact car to heavy duty truck.
Folding tube type EGR cooler with bypass function.
Product design which eliminated futility thoroughly.
The circuit is formed by folding one plate.
Simplification of the bypass circuit (this product has bypass function).
Reduction in weight and cost by minimizing materials.
Nickel brazing
Success of making it standard, series and common.
Under mass production for passenger car |
| |
Intercooler |
Intercooler
Easy to recycle since they are made of aluminum.
We have various types and the optimum setup on vehicles is possible. |
| |
Cooling Module |
Engine Cooling Module
Cooling module is a product which consists of radiator, CAC, condenser, OC, fan system, shroud, coolant tank and etc depends on application.
To realize "performance optimization", the cooling module must be developed by "system partners" who have knowledge on each compornent characteristic and influence on each of them.
Well integrated cooling module is developed by "system partners" who know about all components and condition on the vehicle.
BTEC can offer cooling module including whole products from Behr GmbH & Co. KG and T.RAD Co., Ltd
Cooling module is developed by using a lot of reliable tools such as simulation, component test, module test and vehicle test.
Developed cooling module is evaluated its durability by using own several test facilities. |
| |
Fan clutch |
Features for Bi-Metal Visco® Clutches
Wide variations for all vehicles
Torque range: from 35 to 150 Nm
Respectable engagement controllability of fan speed
modulation for low noise and fuel consumption
Fan speed under OFF condition: 600 - 1200 rpm
High thermal durability & high mech. durability. Also
suitable for crankshaft applications.
Low weight/ Compact dimensions
Features for ER Visco® Clutches
Wide variations mainly for large size vehicles
Torque range: 100 - 350 Nm
Superior control properties and very quick response times
for 1-2% lower fuel consumption
Fan speed under OFF condition: 150 - 350 rpm
High thermal durability & high mech. durability. It is
also suitable for crankshaft applications
Features for Fan
Wide variations for all vehicles
Size: from 450 to 813mm
High air flow capacity
Superior efficiency
Efficient cooling of fan drive |
| W008 |
Riken Corp. |
|
Piston Rings |
DLC treateel piston rings with low friction and high anti-scuffing capability,piston rings for diesel engine,new surface treatment to prevent micro welding,thin width piston rings for gasoline engine and other types of piston rings are exhibited. |
| |
Engine Components |
Various types of engine parts such as value lifters, shims,aluminum value sprung retainers are exhibited.Among all,DLC valve lifters are excellent in low piston are long dualability. |
| |
Camshafts |
Light-weight hollow camshafts are exhibilited. |
| |
Cast Iron Parts |
Light-weight cast iron parts with compliatul shape such as cast hollow crank shaft and lower control arm are exhibited. |
| |
Parts for AT and Power Steering |
Ion vanes,for Power Steering and CVT,Aluminum Vanes for Compresirs,for CVT,Rotation Seal Rings for AT/CVT,Pulley Seal Rings for CVT are exhibited. |
| W009 |
Teikoku Piston Ring Co., Ltd. |
 |
Piston ring, Cylinder liner, Valve seats, Aliminum foil |
Piston ring:TPR is pursuing optimum materials and surface treatment to develop piston rings that oscillate with less friction, even under high temperstures.
Cylinder liner:TPR is striving to improve adherence to the aluminum block by applying centrifugal casting method to make liners thinner, and thereby achieve lower costs.
Valve seate:Featuring excellent resistance to heat and wear resistance with outstanding balance with valves, our sinterd alloy products demonstrate high performance even under extreme conditious. |
